feed-image

MCE 2018 - A GREAT SUCCESS

We would like to thank all those who, with sincere participation, have contributed to the success had during MCE 2018 in Milan. These were days of intense activity and involvement, which saw a fruitful comparison and an interesting exchange of ideas with a clearly professional value. Hoping to maintain a collaborative and productive professional relationship with each of you, we hope to carry on a positive and concrete collaboration.
Thanks again,
All team.

MCE Milano exhibition 2018

mce-date-oriz-ita

We are glad to inform you that Geca , Tecnocontrol & CPF Industriale will be present at MCE exhibition held in Milan , from 13th to 16th March 2018.
We look forward to seeing you at MCE – HALL 5 - Booth M29 – P24 , to show and demonstrate the advantages of our products.

https://www.mcexpocomfort.it/MCE/MCE-2018/

 

 

MCE Milano exhibition 2016

mce-date-oriz-ita

We are glad to inform you that Geca & Tecnocontrol will be present at MCE exhibition held in Milan , from 15th to 18th March 2016.
We look forward to seeing you at MCE – HALL 5 - Booth M29 – P24 , to show and demonstrate the advantages of our products.

http://www.mcexpocomfort.it/MCE/MCE-2016/

 

 

NEW Removable emergency led light for recessed installation.

 

Nuova Gemma

Removable emergency led light for recessed installation. Compatible with the most popular plates in the market, it unites the elevated autonomy at the possibility to be extract from wall lodging to be used like illumination torch. Gemma uses two alkaline rechargeable batteries Ni-MH opure Ni-Cd (inclusive in the wrapping), that could be replace with extreme simplicity from the customer, once exhausted in the course of the years, guaranteeing at the product a boundless duration. See more....

Extension of ATEX certificate

 

 

With the extension 02/11 of our certificate CESI 03 ATEX 323 we have reached the adaptation to the standards EN60079-0:2009 and EN60079-1:2007 of our Gas detectors in anti-exploding custody for their use in areas with potential explosive atmospheres, models such as TS293, SE138 and SE193, characterized by the following new branding:

 0722II 2 G   Ex d II C T6 Gb

 

I PLUS: NEW GENERATION DETECTORS WITH THE POSSIBILITY TO REPLACE THE SENSOR CARTRIDGE

Tecnocontrol presents the excellence in the field of gas detection with the products selection here presented. They can claim performances and standards which cannot find any competitors on the market. Two buttons (F1 and F2) on each instruments allow ordinary maintenance operations; in this way the system is free from any software or external device which has an asynchronous speed of development compared with sensors. This would made the maintenance services difficult for the plant inspection.

Zero Set

  • At the moment of installation might be necessary the "ZERO" regulation; this is an operation which can be made simply by pressing a specific sequence of the buttons F1 and F2.
  • In the normal working period, the detector will automatically adjust the zero drift whether the absence of dangerous conditions has been recognized. By the way, it is always possible to do the operation manually in any necessary occasion.
ROUTINE MAINTENANCE: STREAMLINED SETTING
According to the regulation in force, you are supposed to check periodically that the detector works in a correct way. Also in this case, the operation is extremely simple
Using a specific sequence of the F1 and F2 keys you will be allowed to enter the calibration phase. The red led blinks.
The gas is delivered by a calibration kit connected to the gas tank sample.
You have to wait until the red led turns into a fixed light. Then you need to confirm by using the F2 key.
The red led stops blinking and turns into fixed light only if all the operations have been run correctly, since the sensor is able to discriminate any operator's mistake.
Now the calibration has been completed.

Otherwise you can simply replace the pre-calibrated cartridge.

EMERGENCY MAINTENANCE: REPLACEABLE SENSOR CARTRIDGE

All new generation detectors are made with the possibility to replace the sensor cartridge in field.

The cartridge, together with its references for the traceability of the sample calibration gas, is equipped with calibration electronics: its replacement doesn't require more operations.

MAINTENANCE ADVANTAGE:

ROUTINE MAINTENANCE – the replacement of the cartridge cuts the calibration times with gas and renews it completely.

EMERGENCY MAINTENANCE – simply using the replacement cartridges, you can proceed to their replacement in field, avoiding the detectors disassembly and re-assembly, operations which are necessary in case of a maintenance made in lab. The replacement of the cartridge makes your emergency maintenance very quick and cheap.

CPF Industriale
CPF Industriale
P.IVA 03131150173
via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.310461 - Fax 030.310465
info@cpfindustriale.it
CPF Industriale

CPF Industriale srl
P.IVA 03131150173
via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.310461 - Fax 030.310465
info@cpfindustriale.it

Tecnocontrol srl

Tecnocontrol srl
P.IVA 03543100170
via Miglioli, 47 - 20090 Segrate (MI), Italy
Tel. 02.26922890 - Fax 02.2133734
info@tecnocontrol.it

Geca srl

Geca srl
P.IVA 03124320171
via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.3730218 - Fax 030.3730228
info@gecasrl.it

Geca srl

FAG

via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.3730218 - Fax 030.3730228
info@fagonline.com

Tecnocontrol srl
Tecnocontrol
P.IVA 03543100170
via Miglioli, 47 - 20090 Segrate (MI), Italy
Tel. 02.26922890 - Fax 02.2133734
info@tecnocontrol.it
Geca srl
Geca
P.IVA 03124320171
via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.3730218 - Fax 030.3730228
info@gecasrl.it
FAG
FAG

via E.Fermi, 98 - 25064 Gussago (BS), Italy
Tel. 030.3730218 - Fax 030.3730228
info@fagonline.com