TS236 - TS237 Zirconium oxygen probes
Ziconium oxide probe for Oxygen (T.max. 700°C).
This application represented by the use of zirconium oxide probe for O2 measurement allows to overcome the disadvantages connected to the electrochemical cell, that as well known, cannot be placed in direct contact to combustion fumes. The probe TS236 is self rechargeable and does not need of any suction circuits: improving feedback time, accuracy, maintenance and, not least, easy installation. Made in an aluminium cast housing where the sensor is housed in a stainless steel stem fitted with a threaded joint for the fastening to the chimney.
Power supply 230Vca 50-60HZ (+10-15%)
Absorption 50 VA max a 230Vac
O2 resolution 0,1%
Measure range 4÷20mA (0,0÷25,0%)
Work Temp. and Humidity da +5° a + 45°C / da 15 a 95%
Housing size H x L x D 106 x 156 x 81 mm
Size mm TS237 L x D 360 x 40 mm – flange DN40
Size TS236 L x D 335 x 32 mm – thread 1” ½
Standards and approvals Norma EN ISO/IEC 17025 Decreto Legislativo 3 aprile 2006 n° 152 In fase di certificazione QAL1
- instructions TS236 - TS237 Zirconium oxygen probes